727-CY7C6521328PVXIT

Functional Overview

CY7C65213/CY7C65213A is a fully integrated USB-to-UART bridge that provides a simple method to upgrade UART-based devices to USB with a minimal number of components. CY7C65213/CY7C65213A includes a USB 2.0 Full-Speed controller, a UART transceiver, an internal regulator, an internal oscillator, and a 512-byte flash in a 32-pin QFN and 28-pin SSOP package.
The internal flash is used to store custom-specific USB descriptors and GPIO configuration. This is done in-system using a configuration utility that communicates over the USB interface.
Cypress provides royalty-free Virtual COM Port (VCP) device drivers. The drivers allow the device to appear as a COM port in PC applications. All UART signals, including handshaking and control signals, are implemented.

Features

â–  USB 2.0 certified, Full-Speed (12 Mbps)
❐ Supports communication driver class (CDC), personal health care device class (PHDC), and vendor-device class
❐ Battery charger detection (BCD) compliant with USB Battery Charging Specification Rev. 1.2 (peripheral detect only)
❐ Integrated USB termination resistors
â–  Single-channel configurable UART interfaces
❐ Supports 2-pin, 4-pin, 6-pin, 8-pin UART interface
❐ Data rates up to 3 Mbps
❐ 256 bytes for each transmit and receive buffer
❐ Data format:
• 7 or 8 data bits
• 1 or 2 stop bits
• No parity, even, odd, mark, or space parity
❐ Supports parity, overrun, and framing errors
❐ Supports flow control using CTS, RTS, DTR, DSR
❐ Supports UART break signal
❐ CY7C65213 supports single channel RS232/RS422 interfaces whereas CY7C65213A supports RS232/RS422/RS485 interfaces
â–  General-purpose input/output (GPIO): 8 pins
â–  Supports unique serial number feature for each device, which fixes the COM port number permanently when USB-UART LP Bridge controller device plugs in
â–  Configuration utility (Windows) to configure the following:
❐ Vendor ID (VID), Product ID (PID), and Product and Manufacturer descriptors
❐ UART
❐ Charger detection
❐ GPIO
â–  Driver support for VCOM and DLL
❐ Windows 10: 32- and 64-bit versions
❐ Windows 8.1: 32- and 64-bit versions
❐ Windows 8: 32- and 64-bit versions
❐ Windows 7: 32- and 64-bit versions
❐ Windows Vista: 32- and 64-bit versions
❐ Windows XP: 32- and 64-bit versions
❐ Windows CE
❐ Mac OS-X: 10.6, and later versions
❐ Linux: Kernel version 2.6.35 and later versions
❐ Android: Gingerbread and later versions
â–  512-byte flash for storing configuration parameters
â–  Clocking: Integrated 48-MHz clock oscillator
â–  USB suspend mode for low power
â–  Supports bus-/self-powered configurations
â–  Compatible with USB 2.0 and USB 3.0 host controllers
â–  Operating voltage: 1.71 to 5.50 V
â–  Operating temperature:
❐ Commercial: 0 °C to 70 °C
❐ Industrial: –40 °C to 85 °C
â–  ESD protection: 2.2-kV HBM
â–  RoHS-compliant package
❐ 28-pin SSOP (10 × 7.5 × 1.65 mm, 0.65-mm pitch)
❐ 32-pin QFN (5 × 5 × 1 mm, 0.5-mm pitch)
â–  Ordering part number
❐ CY7C65213-28PVXI
❐ CY7C65213-32LTXI
❐ CY7C65213A-28PVXI
❐ CY7C65213A-32LTXI

Applications

â–  Blood glucose meter
â–  Battery-operated devices
â–  USB-to-UART cables
â–  Enables USB connectivity in legacy peripherals with UART
â–  Point-of-Sale (POS) terminals
â–  Industrial and T&M (Test and Measurement) devices