Image is for illustrative purposes only. Please refer to product description.
DS26334GNA3+
IC LIU E1/T1/J1 3.3V 256-CSBGA
- Product Category: Telecom Interface ICs
- Mfr. Part # DS26334GNA3+
- Manufacturer: Maxim Integrated
- Lead Free Status /RoHS Status:
- Data Sheet: DS26334GNA3+ Datasheet
- Inventory: In Stock
- Unit Price: Inquiry
- Quantity: -+
-
Please send inquiry,we will respond immediately.
Mfr. Part #: DS26334GNA3+
- Specifications
- Product Details
Specifications
Product Details
GENERAL DESCRIPTION
The DS26334 is a 16-channel short/long-haul line interface unit (LIU) that supports E1/T1/J1 from a single 3.3V power supply. A single bill of material can support E1/T1/J1 with minimum external components. Redundancy is supported through nonintrusive monitoring, optimal high impedance modes and configurable 1:1 or 1+1 backup enhancements. An on-chip synthesizer generates the E1/T1/J1 clock rates by a single master clock input of various frequencies. Two clock output references are also offered. The device is offered in a 256-pin TEBGA, the smallest package available for a 16-channel LIU.FEATURES
16 E1, T1, or J1 Short/Long-Haul Line Interface Unitsâ– Independent E1, T1 or J1 Selections
â– Software-Selectable Transmit and Receive-Side Impedance Matching
â– Crystal Less Jitter Attenuator
â– Selectable Single-Rail and Dual-Rail Mode and AMI or HDB3/ B8ZS Line Encoding and Decoding
â– Detection and Generation of AIS
â– Digital/Analog Loss of Signal Detection as per T1.231, G.775 and ETSI 300233
â– External Master Clock can be Multiple of 2.048MHz or 1.544MHz for T1/J1 or E1 Operation. This Clock will be Internally Adapted for T1 or E1 Usage.
■Receiver Signal Level Indicator from -2.5dB to -38dB in T1 Mode and –3dB to –43dB in E1 Mode in 2.5dB Increments
â– Two Built-In BERT Testers for Diagnostics
â– 8-Bit Parallel Interface Support for Intel or Motorola Mode or a 4-Wire Serial Interface
â– Transmit Short Circuit Protection
â– G.772 Nonintrusive Monitoring
â– Receive Monitor Mode Handles Combinations of 14dB to 30dB of Resistive Attenuation Along with 12dB to 30dB of Cable Attenuation
■Specification Compliance to the Latest T1 and E1 Standards—ANSI T1.102, AT&T Pub 62411, T1.231, T1.403, ITU G.703, G.742, G.775, G.823, ETSI 300 166, and ETSI 300 233
â– Single 3.3V Supply with 5V Tolerant I/O
â– JTAG Boundary Scan as per IEEE 1149.1
APPLICATIONS
T1 Digital Cross-ConnectsATM and Frame Relay Equipment
Wireless Base Stations
ISDN Primary Rate Interface
E1/T1/J1 Multiplexer and Channel Banks
E1/T1/J1 LAN/WAN Routers
ICCHIPS, where the pulse of innovation meets the heartbeat of wholesale excellence. Unveil the future of electronic components with our flagship product, the DS26334GNA3+. As your conduit to groundbreaking technology, we stand as the bridge between visionary suppliers and pioneering manufacturers, committed to orchestrating seamless transactions that cater to the ever-evolving needs of the electronics industry.
Please send inquiry, we will respond immediately.
Mfr. Part #: DS26334GNA3+