Image is for illustrative purposes only. Please refer to product description.
DS26521L+
IC TXRX T1/E1/J1 64-LQFP
- Product Category: Telecom Interface ICs
- Mfr. Part # DS26521L+
- Manufacturer: Maxim Integrated
- Package: 64-LQFP
- Lead Free Status /RoHS Status:
- Data Sheet: DS26521L+ Datasheet
- Inventory: In Stock
- Unit Price: Inquiry
- Quantity: -+
-
Please send inquiry,we will respond immediately.
Mfr. Part #: DS26521L+
- Specifications
- Product Details
Specifications
Product Details
GENERAL DESCRIPTION
The DS26334 is a 16-channel short/long-haul line interface unit (LIU) that supports E1/T1/J1 from a single 3.3V power supply. A single bill of material can support E1/T1/J1 that requires no external termination. Redundancy is supported through nonintrusive monitoring, optimal high-impedance modes and configurable 1:1 or 1+1 backup enhancements. An on-chip synthesizer generates the E1/T1/J1 clock rates by a single master clock input of various frequencies. Two clock output references are also offered. The device is offered in a 256-pin TE-CSBGA, the smallest package available for a 16-channel LIU.FEATURES
â– 16 E1, T1, or J1 Short/Long-Haul Line Interface Unitsâ– Independent E1, T1 or J1 Selections
â– Fully Internal Impedance Match Requires No External Resistors
â– Software-Selectable Transmit and ReceiveSide Impedance Match
â– Crystal-Less Jitter Attenuator
â– Selectable Single-Rail and Dual-Rail Mode and AMI or HDB3/B8ZS Line Encoding and Decoding
â– Detection and Generation of AIS
â– Digital/Analog Loss of Signal Detection as per T1.231, G.775 and ETS 300 233
â– External Master Clock Can Be Multiple of 2.048MHz or 1.544MHz for T1/J1 or E1 Operation; This Clock Will Be Internally Adapted for T1 or E1 Usage
â– Receiver Signal Level Indicator from -2.5dB to -38dB in T1 Mode and -3dB to -43dB in E1 Mode in 2.5dB Increments
â– Two Built-In BERT Testers for Diagnostics
â– 8-Bit Parallel Interface Support for Intel or Motorola Mode or a 4-Wire Serial Interface
â– Transmit Short-Circuit Protection
â– G.772 Nonintrusive Monitoring
â– Receive Monitor Mode Handles Combinations of 14dB to 30dB of Resistive Attenuation Along with 12dB to 30dB of Cable Attenuation
■Specification Compliance to the Latest T1 and E1 Standards—ANSI T1.102, AT&T Pub 62411, T1.231, T1.403, ITU-T G.703, G.742, G.775, G.823, ETS 300 166, and ETS 300 233
â– Single 3.3V Supply with 5V Tolerant I/O
â– JTAG Boundary Scan as Per IEEE 1149.1
APPLICATIONS
T1 Digital Cross-ConnectsATM and Frame Relay Equipment
Wireless Base Stations
ISDN Primary Rate Interface
E1/T1/J1 Multiplexer and Channel Banks
E1/T1/J1 LAN/WAN Routers
ICCHIPS, where the pulse of innovation meets the heartbeat of wholesale excellence. Unveil the future of electronic components with our flagship product, the DS26521L+. As your conduit to groundbreaking technology, we stand as the bridge between visionary suppliers and pioneering manufacturers, committed to orchestrating seamless transactions that cater to the ever-evolving needs of the electronics industry.
Please send inquiry, we will respond immediately.
Mfr. Part #: DS26521L+