MAX2032ETP+

General Description

The MAX2032 high-linearity passive upconverter or downconverter mixer is designed to provide +33dBm IIP3, 7dB NF, and 7dB conversion loss for a 650MHz to 1000MHz RF frequency range to support a multitude of base-station applications. With a 650MHz to 1250MHz LO frequency range, this particular mixer is ideal for high-side LO injection architectures. For a pin-to-pin compatible mixer meant for low-side LO injection, refer to the MAX2029.
In addition to offering excellent linearity and noise performance, the MAX2032 also yields a high level of component integration. This device includes a double balanced passive mixer core, a dual-input LO selectable switch, and an LO buffer. On-chip baluns are also integrated to allow for a single-ended RF input for downconversion (or RF output for upconversion) and single-ended LO inputs. The MAX2032 requires a nominal LO drive of 0dBm, and supply current is guaranteed to be below 100mA.

Features

♦ 650MHz to 1000MHz RF Frequency Range
♦ 650MHz to 1250MHz LO Frequency Range
♦ 570MHz to 900MHz LO Frequency Range
(Refer to the MAX2029 Data Sheet)
♦ DC to 250MHz IF Frequency Range
♦ 7dB Conversion Loss
♦ +33dBm Input IP3
♦ +24dBm Input 1dB Compression Point
♦ 7dB Noise Figure
♦ Integrated LO Buffer
♦ Integrated RF and LO Baluns
♦ Low -3dBm to +3dBm LO Drive
♦ Built-In SPDT LO Switch with 49dB LO1 to LO2
Isolation and 50ns Switching Time
♦ Pin Compatible with the MAX2039/MAX2041
1700MHz to 2200MHz Mixers
♦ External Current-Setting Resistor Provides Option
for Operating Mixer in Reduced-Power/Reduced
Performance Mode

Applications

WCDMA/LTE and cdma2000® Base Stations
GSM 850/GSM 900 2G and 2.5G EDGE Base Stations
Integrated Digital Enhanced Network (iDEN®) Base Stations
WiMAXâ„¢ Base Stations and Customer Premise Equipment
Predistortion Receivers
Microwave and Fixed Broadband Wireless Access
Wireless Local Loop
Digital and Spread Spectrum Communication Systems