MFRC522

Introduction

This document describes the functionality of the contactless reader/writer MFRC522. It includes the functional and electrical specifications.

General description

The MFRC522 is a highly integrated reader/writer for contactless communication at 13.56 MHz. The MFRC522 reader supports ISO 14443A / MIFARE® mode.
The MFRC522’s internal transmitter part is able to drive a reader/writer antenna designed to communicate with ISO/IEC 14443A/MIFARE® cards and transponders without additional active circuitry. The receiver part provides a robust and efficient implementation of a demodulation and decoding circuitry for signals from ISO/IEC 14443A/MIFARE® compatible cards and transponders. The digital part handles the complete ISO/IEC 14443A framing and error detection (Parity & CRC).The MFRC522 supports MIFARE®Classic (e.g. MIFARE® Standard) products. The MFRC522 supports contactless communication using MIFARE® higher transfer speeds up to 848 kbit/s in both directions.

Various host interfaces are implemented:

• SPI interface
• serial UART (similar to RS232 with voltage levels according pad voltage supply)
• I2C interface.

Features

â–  Highly integrated analog circuitry to demodulate and decode responses
â–  Buffered output drivers to connect an antenna with minimum number of external
components
■ Supports ISO/IEC 14443A / MIFARE®
â–  Typical operating distance in Reader/Writer mode for communication to a
ISO/IEC 14443A / MIFARE® up to 50 mm depending on the antenna size and tuning
■ Supports MIFARE® Classic encryption in Reader/Writer mode
â–  Supports ISO/IEC 14443A higher transfer speed communication up to 848 kbit/s
â–  Support of the MFIN / MFOUT
â–  Additional power supply to directly supply the smart card IC connected via MFIN /
MFOUT
â–  Supported host interfaces
â—† SPI interface up to 10 Mbit/s
â—† I2C interface up to 400 kbit/s in Fast mode, up to 3400 kbit/s in High-speed mode
â—† serial UART in different transfer speeds up to 1228.8 kbit/s, framing according to
the RS232 interface with voltage levels according pad voltage supply
â–  Comfortable 64 byte send and receive FIFO-buffer
â–  Flexible interrupt modes
â–  Hard reset with low power function
â–  Power-down mode per software
â–  Programmable timer
â–  Internal oscillator to connect 27.12 MHz quartz
â–  2.5 - 3.3 V power supply
â–  CRC Co-processor
â–  Free programmable I/O pins
â–  Internal self test