PCA9512BD,118

General description

The PCA9512A/B is a hot swappable I2C-bus and SMBus buffer that allows I/O card insertion into a live backplane without corruption of the data and clock buses and includes two dedicated supply voltage pins to provide level shifting between 3.3 V and 5 V systems while maintaining the best noise margin for each voltage level. Either pin may be powered with supply voltages ranging from 2.7 V to 5.5 V with no constraints on which supply voltage is higher. Control circuitry prevents the backplane from being connected to the card until a stop bit or bus idle occurs on the backplane without bus contention on the card. When the connection is made, the PCA9512A/B provides bidirectional buffering, keeping the backplane and card capacitances isolated.

Features and benefits

â–  Bidirectional buffer for SDA and SCL lines increases fan-out and prevents SDA and SCL corruption during live board insertion and removal from multipoint backplane systems
â–  Compatible with I2C-bus Standard mode, I2C-bus Fast mode, and SMBus standards
■ Built-in ΔV/Δt rise time accelerators on all SDA and SCL lines (0.6 V threshold) with ability to disable ΔV/Δt rise time accelerator through the ACC pin for lightly loaded systems, requires the bus pull-up voltage and respective supply voltage (VCC or VCC2) to be the same
â–  5 V to 3.3 V level translation with optimum noise margin
â–  High-impedance SDAn and SCLn pins for VCC or VCC2 = 0 V
â–  1 V precharge on all SDAn and SCLn pins
â–  Supports clock stretching and multiple master arbitration and synchronization
â–  Operating power supply voltage range: 2.7 V to 5.5 V
â–  0 Hz to 400 kHz clock frequency
â–  ESD protection exceeds 2000 V HBM per JESD22-A114 and 1000 V CDM per JESD22-C101
â–  Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA
â–  Packages offered: SO8, TSSOP8 (MSOP8)

Applications

â–  cPCI, VME, AdvancedTCA cards and other multipoint backplane cards that are required to be inserted or removed from an operating system